homeabout usioso technologyrobust IOSOproductsapplicationcooperationpartnerscontacts

Publication

  1. Egorov I.N.,  Kretinin G.V., Fedechkin K.S. “Multi-Level Robust Design Optimization Fan”, Workshop CEAS, Vrije Universiteit Brussels (VUB), Brussels, Belgium,  October 28-29, 2010.

  2. Egorov I.N.,  Kretinin G.V., Fedechkin K.S. “Robust Design Optimization Fan using 3D CFD code”, Conference ASME Turbo Expo 2010, Glasgow, Scotland, UK,  June 14-18, 2010.

  3. Kuzmenko M.L., Egorov I.N., Shmotin Yu. N., Kretinin G.V., Fedechkin K.S. “Optimization Studies of the Aircraft High-Bypass ratio Turbo Engine Fan”, Conference ASME Turbo Expo 2010, Glasgow, Scotland, UK,  June 14-18, 2010.

  4. Dulikravich G.S., Egorov  I.N., Kumar A.  “Titanium Based Alloy Chemistry Optimization for Maximum Strength, Minimum Weight and Minimum Cost Using JMatPro and IOSO Software ”, 2008 TMS Annual Meeting & Exhibition,   USA, March 8-9 , 2008.

  5. Kuzmenko M.L., Egorov I.N., Shmotin Yu. N., Chupin P.V., Fedechkin K.S. “Multistage axial flow compressor optimization using 3D CFD code”, 11th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, Portsmouth, Virginia, USA, 6-8 September, 2006.

  6. Egorov I.N., Kretinin G.V., Leschenko I.A., Kuptcov S.V. “Multi-objective Optimization Using IOSO Technology”, 7-th ASMO UK / ISSMO Conference on engineering Design optimization, Bath, UK, 7-8 July, 2008.

  7. Egorov, I.N., Kretinin, G.V., Leshchenko, I.A. and Kuptzov,S.V. “Use of the IOSO NM Software for Complex Optimization Problems”. 11th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, Portsmouth, Virginia, USA, 6-8 September, 2006. Inverse Problems, Design and Optimization Symposium, Miami, Florida, USA, 16-18 April, 2007.

  8. Kuzmenko M.L., Egorov I.N., Shmotin Yu. N., Fedechkin K.S. “Multidisciplinary Optimization of Complex Technical Systems”, III European Conference Mechanics-Solids, Structures and Coupled problems in Engineering - ECCM-2006, Lisbon, Portugal, 5-8 June, 2006.

  9. Kuzmenko M.L., Egorov I.N., Shmotin Yu. N., Chupin P.V., Fedechkin K.S. “Multistage axial flow compressor optimization using 3D CFD code”, 6th ASMO UK/ISSMO conference on Engineering Design Optimization, Oxford, UK, 3-4 July, 2006.

  10. Dulikravich,G.S., Egorov,I.N., “Optimization Chemistry of bulk metallic glasses for improved thermal stability”. 2006 TMS Annual Meeting & Exhibition; Symposium on Bulk Metallic Glasses. TMS (The minerals, Metals & Materials Society).  San-Antonio, TX, USA.  March 12-16, 2006.

  11. Kuzmenko M.L. Shmotin Yu. N. “Increasing of Fan Efficiency basing on Optimization Technology”, 17th International Symposium on Airbreathing Engines – ISABE 2005, Munich, Gemany, September 4-9, 2005.

  12. Egorov I.N., Fedechkin K.S., Shmotin Yu. N., Stepanov A.A., “Application of Optimization Methods in Turbomachinery Design”, 5th International conference on Inverse problems in engineering Theory and Practice, Cambridge, UK, July 11-16, 2005.

  13. Egorov I.N., Kuzmenko M.L.,  Shmotin Yu. N. “Axial Fan Optimization Using 3D Codes”, Conference ASME Turbo Expo 2005, Reno, Nevada, USA, June 6-9, 2005.

  14. Egorov I.N., Shmotin Yu. N., Fedechkin K.S., “Increasing of Axial Fan Efficiency Basing on Optimization Technology”, 6th World Congress on Structural and Multidisciplinary Optimization, Rio de Janeiro, May 30-June 3, 2005.

  15. Egorov, I.N., Kretinin, G.V., Leshchenko, I.A. and Kuptzov,S.V. “IOSO MN Optimization Toolkit – Novel Software for Multidisciplinary Optimization”, Rio de Janeiro, May 30-June 3, 2005.

  16. Dulikravich,G.S., Egorov,I.N., “Robust Optimization of Concentrations of Alloying Elements in Steel for Maximum Temperature, Strength, Time-to-Rupture and Minimum Cost and Weight”, Conference on Computational Methods for Coupled Problems in Science and Engineering - COUPLED PROBLEMS 2005, Santorini Island, Greece, May 25-28, 2005.

  17. Egorov, I.N., Kretinin, G.V., Leshchenko, I.A. and Kuptzov,S.V., Babiy Yu.I.,”Optimization of Complex Technical Systems”, Ninth International Conference on computer Aided Optimum Design in Engineering – OPTI-2005, Skiathos, Greece, May 23-25, 2005.

  18. Egorov I.N.,  Kuzmenko M.L., Shmotin Yu. N. “Increasing of air Engine Efficiency Basing on Optimization Technology”, International Seminar – Aero India 2005, Bangalore, India, February 7-9, 2005.

  19. Egorov, I.N., Kretinin, G.V., Leshchenko, I.A. and Kuptzov,S.V. “The main Features of IOSO Technology Usage for Multi-Objective design optimization”,10th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, Albany, New York, USA, August 30-September 1, 2004.

  20. Egorov,I.N., Dulikravich,G.S., G.S. Sikka, V.N. Muralidharan, “Optimization of alloy Chemistry for Maximum Stress and Time-to-Rupture at High Temperature”, 10th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, Albany, New York, USA, August 30-September 1, 2004.

  21. Egorov, I.N., Kretinin, G.V., Leshchenko, I.A. and Kuptzov,S.V. “Multi-Objective Robust optimization of Air Engine Using IOSO Technology”, Conference ASME Turbo Expo 2004, Vienna, Austria,  June 14-17, 2004.

  22. Egorov,I.N., Dulikravich,G.S., “Inverse Design of Alloys for Specified Stress, temperature and time-to-Rupture by Using Stochastic Optimization”, Inverse problems, Design and Optimization Symposium, Rio de Janeiro, March 17-19, 2004.

  23. Egorov, I.N., Kretinin, G.V., Leshchenko, I.A. and Kuptzov,S.V. “Multi-Objective approach for Robust Design Optimization Problems”, Inverse problems, Design and Optimization Symposium, Rio de Janeiro, March 17-19, 2004.

  24. Egorov, I.N., Kretinin, G.V., Leshchenko, I.A. and Kuptzov,S.V. “Multi-Objective Robust Optimization Using IOSO Technology, Part I: Main Features”, EUROGEN 2003, Barcelona, Spain, September 15-17, 2003.

  25. Egorov, I.N., Kretinin, G.V., Leshchenko, I.A. and Kuptzov,S.V. “Multi-Objective Robust Optimization Using IOSO Technology, Part II: Real-Life Examples”, EUROGEN 2003, Barcelona, Spain, September 15-17, 2003.

  26. Dulikravich,G.S., Dennis,B.H., Egorov,I.N., Sobieczky,H. and Yoshimura,S. "Parallel Thermo Elasticity Optimization of 3-D Serpentine Cooling Passages in Turbine Blades"; Conference ASME Turbo Expo 2003, Atlanta, Georgia, USA, June 16-19, 2003.

  27. Dulikravich,G.S., Dennis,B.H., Egorov,I.N., and Yoshimura,S.  "Optimization of a Large Number of Coolant Passages Located Close to the Surface of a Turbine Blade", Conference ASME Turbo Expo 2003, Atlanta, Georgia, USA, June 16-19, 2003.

  28. Dulikravich,G.S., Egorov,I.N. "Calibration of Microprocessor Control Systems for Specified Levels of Engine Exhaust Toxicity" (.pdf, 813Kb),19th International JUMV Conference SCIENCE AND MOTOR VEHICLES 2003, Belgrade, May 26-28, 2003.

  29. Dulikravich,G.S., Egorov,I.N., Sikka,V.K. and Muralidharan,G. "Semi-Stochastic Multi-Objective Optimization of Hemical Composition of High Temperature Austenitic Steels for Desired Mechanical Properties" (.pdf, 571Kb), Symposium on Materials Processing Under the Influence of Electrical and Magnetic Fields, 2003 TMS Annual Meeting, San Diego, CA, March 2-6, 2003

  30. Egorov, I.N., Kretinin, G.V. and Leshchenko, I.A. "How to Execute Robust Design Optimization" (.pdf, 395Kb), 9th AIAA/ISSMO Symposium on Multidisciplinary Analysis and Optimization, 04 - 06 Sep. 2002, Atlanta, Georgia.

  31. Egorov, I.N., Kretinin, G.V., Leshchenko, I.A. and Kuptzov,S.V. "IOSO Optimization Toolkit - Novel Software to Create Better Design" (.pdf, 708Kb), 9th AIAA/ISSMO Symposium on Multidisciplinary Analysis and Optimization, 04 - 06 Sep. 2002, Atlanta, Georgia.

  32. Egorov, I.N., Kretinin, G.V. and Leshchenko, I.A. "Robust Design Optimization Strategy of IOSO Technology" (.pdf, 141Kb), WCCM V, Fifth World Congress on Computational Mechanics, July 7-12, 2002, Vienna, Austria.

  33. Egorov, I.N., Kretinin, G.V. and Leshchenko, I.A. "Optimization Algorithms as Tools for the Solution of Inverse Problems" (.pdf, 131Kb), WCCM V, Fifth World Congress on Computational Mechanics, July 7-12, 2002, Vienna, Austria.

  34. Dulikravich,G.S., Dennis,B.H., Martin,T.J. and Egorov,I.N., "Multi-Disciplinary Design Optimization" (.pdf, 336Kb), Evolution Methods for Design, Optimization and Control, (eds:K.Giannakoglou,D. Tsahalis, J. Periaux, K. Papailiou and T. Fogarty), CIMNE, Barselona, 2001.

  35. Dulikravich, G.S., Dennis, B.H., Martin T.J. and Egorov, I.N., "Multi-Disciplinary Analysis and Design Optimization" (.pdf, 320Kb), Invited Lecture, Mini-Symposium on Inverse Problems - State of Art and Future Trends, XXIV Brazilian Congress on Applied and Computational Mathematics, Sept. 10-13, 2001, Belo Horizonte, Brazil.

  36. Egorov I.N., Kretinin G.V., Leshchenko I.A “Effective Approach for Multidisciplinary Optimization Problems Solution”, UEF, Optimization in Industry III, Italy, 2001.

  37. Egorov I.N., Kretinin G.V., Leshchenko I.A., “Stochastic Optimization of Parameters and Control Laws of the Aircraft Gas-Turbine Engines – a Step to a Robust Design”, ISIP 2001, Nagana, Japan, 2001.

  38. Dennis, B.H., Han, Z.-X., Egorov, I.N., Dulikravich, G.S. and Poloni, C., 2000, “Multi-Objective Optimization of Turbomachinery Cascades for Minimum Loss, Maximum Loading, and Maximum Gap-to-Chord Ratio”, AIAA Multidisciplinary Analysis and Optimization Conference and Exhibit, Long Beach, CA, Sept. 5-8, 2000; also to appear in International Journal of Turbo & Jet-Engines, 2001

  39. Egorov I.N., Kretinin G.V., Leshchenko I.A., “Approximation Methods Usage to Reduce Time Expenditures for Multidisciplinary Optimization Problems Solution”, AIAA 2000-4896, 8th AIAA/NASA/USAF/ISSMO Symposium on Multidisciplinary Analysis and Optimization, 2000.

  40. Egorov I.N., Kretinin G.V., Leshchenko I.A., “Two Approaches to Multidisciplinary Optimization Problems”, presented at European Congress on Computational Methods in Applied Sciences and Engineering - ECCOMAS2000, Barselona, Spain, 2000.

  41. Egorov I.N., Kretinin G.V., Leshchenko I.A., Babiy Y.I., "The Use of Variable Fidelity Models in the Optimization Problems for Aircraft Engines Parameters and Control Laws”, ASME, 2000-GT-3, 2000.

  42. Egorov I.N., Kretinin G.V., Leshchenko I.A., “The Multicriteria Optimization of the Preliminary Design of High-Bypass Ratio Turbofan Engine”, AIAA 2000-0843, presented at 38th Aerospase Sciences Meeting and Exhibition, 2000.

  43. Egorov I.N., Kretinin G.V., Leshchenko I.A., Kosiuk S.S., Babiy Y.I., "The stochastic optimization methodology for the aircraft gas turbine engines parameters and control laws", MCB University Press, ISBN: 0-86176-650-4, Proceedings of the 1st ASMO UK/ISSMO conference on Engineering Design Optimization, pp.149-157, 1999.

  44. Egorov I.N., Kretinin G.V., Leshchenko I.A., Kostiuk S.S, “The Methodology of Stochastic Optimization of Parameters and Control Laws for the Aircraft Gas-Turbine Engines Flow Passage Components”, ASME, 99-GT-227, 1999.

  45. Egorov I.N., Kretinin G.V., Leshchenko I.A., “The Effective Approximation Method for Multidisciplinary Optimization”, ISSMO, Short paper proceedings of 3rd WCSMO, pp.143-149, New York, 1999.

  46. Egorov I.N., Kretinin G.V., Leshchenko I.A., “The Multilevel Optimization of Complex Engineering Systems”, ISSMO, Short paper proceedings of 3rd WCSMO, pp.414-417, New York, 1999.

  47. Egorov I.N., “Indirect Optimization Method on the Basis of Self-Organization”, Curtin University of Technology, Optimization Techniques and Applications (ICOTA’98), Vol.2, pp. 683-691, Perth, Australia, 1998.

  48. Egorov I.N., Kretinin G.V., Leshchenko I.A., Kostiuk S.S, “The Technology of Multipurpose Optimization of Gas-Turbine Engines and their Components “, ASME, 98-GT-512, 1998.

  49. Egorov I.N., Kretinin G.V., Leshchenko I.A., Kostiuk S.S, “The Technology of Multipurpose Optimization of Gas-Turbine Engines and their Components “, ASME, 98-GT-512, 1998.

  50. Egorov I.N., Kretinin G.V., Leshchenko I.A., “Optimal Designing and Control of Gas-Turbine Engine Components. Multicriteria Approach", MCB University Press, Aircraft Engineering and Aerospace Technology, ISSN 0002-2667, Vol.69, N 6, pp.518-526, 1997

  51. Egorov I.N., Kretinin G.V., Leshchenko I.A., “Multicriteria Optimization of Time Control Laws of Short Take-Off and Vertical Landing Aircraft”, ASME, 97-GT-263, 1997.

  52. Egorov I.N., Kretinin G.V., “Search for Compromise Solution of the Multistage Axial Compressor’s Stochastic Optimization Problem”, World Publishing Corporation, Aerothermodynamics of internal flows III, pp. 112-120, Beijing, China, 1996.

  53. Egorov I.N., Kretinin G.V., Talyzina V.S., et al., “Multistage Axial Flow Compressor’s Development on the Basis of the Numerical Optimization Methods”, World Publishing Corporation, Aerothermodynamics of internal flows III, pp. 104-112, Beijing, China, 1996.

  54. Egorov I.N., Kretinin G.V., Chernjak B.N., et al., “Fast methods of experimental calibrating of microprocessor control system”, Proceedings of 5-th International Congress EAEC, SIA9506A36, Strasbourg, France, 1995.

  55. Egorov I.N., Kretinin G.V., “Optimum Control of Variable Components in Aircraft Gas Turbine Engines under Non-stationary Flow Disturbances at the Inlet”, ASME, 94-GT-268, 1994.

  56. Egorov I.N., Kretinin G.V., “Optimization of Gas Turbine Engine Elements by Probability Criteria”, ASME, 93-GT-191, 1993.

  57. Egorov I.N., “Deterministic and Stochastic Optimization of Variable Axial Compressor”, ASME, 93-GT-397, 1993.

  58. Egorov I.N., Kretinin G.V., “Multicriterion Stochastic Optimization of Axial Compressor”, ASME "COGEN-TURBO-VI" Proceedings, Huston, USA, 1992.

  59. Egorov I.N., "Optimization of a Multistage Axial Compressor. Stochastic Approach", ASME, 92-GT-163, 1992.

  60. Egorov I.N., “Optimization of a Multistage Axial Compressor in a Gas-Turbine Engine System”, ASME, 92-GT-424, 1992.

  61. Egorov I.N., Beknev V.S., Talyzina V.S., “Multicriteria Design Optimization of the Multistage Axial Flow Compressor”, ASME "COGEN-TURBO-V" Proceedings, Budapest, Hungary, 1991.

  62. Egorov I.N., Fomin V.N., Talyzina V.S., “Numerical Method of Optimization of a Multistage Axial Compressor”, The 1-st ISAIF Proceedings, Beijing, China, 1990.

 

homeabout usioso technologyrobust IOSOproductsapplicationcooperationpartnerscontacts
 
© Sigma Technology 2001,2011